Z31 Project



Z31 Project

Postby chaparral2f » August 30th, 2014, 3:22 pm

]Here are a few pictures of my project. as the bard said, 'Tis neither fish nor fowl, and I'm not to sure it it's even a Nissan.
chassis on wheels1.JPG

003.JPG

clip down 1 (640x480).jpg

clip raised 2 (800x600) (640x480).jpg
You do not have the required permissions to view the files attached to this post.
chaparral2f

 
Posts: 19
Joined: January 11th, 2013, 9:30 pm

Re: Z31 Project

Postby grumpyvette » August 30th, 2014, 3:24 pm

WOW, I can see serious potential in that!
most newer guys to the hobby don,t realize that a significant reduction in weight is frequently even more effective than a boost in horse power, simply because a weight reduction helps not only helps increase the rate of acceleration but allows the brakes,to be more effective, helps inertial loads in handling and in many cases helps traction, if the suspensions set up correctly, and definitely reduces parts breakage rates
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Re: Z31 Project

Postby Indycars » August 30th, 2014, 3:33 pm


Nice car, but you look a little stumped in the 3rd picture! :D

Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: Z31 Project

Postby 87vette81big » August 30th, 2014, 3:39 pm

:mrgreen:

I like It.
87vette81big

User avatar
 
Posts: 3278
Joined: February 28th, 2012, 12:34 am
Location: Central Illinois

Re: Z31 Project

Postby chaparral2f » August 30th, 2014, 6:11 pm

Indycars wrote:
Nice car, but you look a little stumped in the 3rd picture! :D


That isn't me, its one of the few people I consider a brother. He was tons of help in designing this thing and I used his shop to do this.
Miller wirefeed andplasma cutter.JPG
migmatic 250 alum wirefeed and lincoln tigmatic.JPG
You do not have the required permissions to view the files attached to this post.
chaparral2f

 
Posts: 19
Joined: January 11th, 2013, 9:30 pm

Re: Z31 Project

Postby Indycars » August 30th, 2014, 6:39 pm


It obvious then, you need to be nice to him!

Glad you decided to post a build thread here, I'm looking forward to keeping
up to date on this one.

Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: Z31 Project

Postby philly » August 30th, 2014, 7:50 pm

this looks like the start of a really great thread... can wait to see how it all turns out
-phil

There's never enough money to build it right, but there's always enough to build it twice!
philly

User avatar
 
Posts: 1364
Joined: December 12th, 2013, 4:08 pm
Location: Miami FL

Re: Z31 Project

Postby chaparral2f » August 31st, 2014, 7:12 pm

philly wrote:this looks like the start of a really great thread... can wait to see how it all turns out

Yeah, me too! :mrgreen:
chaparral2f

 
Posts: 19
Joined: January 11th, 2013, 9:30 pm


Return to Picture gallery

Who is online

Users browsing this forum: No registered users and 1 guest