mill and lathe info you might need



mill and lathe info you might need

Postby grumpyvette » September 30th, 2009, 4:24 pm

theres info, with videos included, in the link and more videos below
theres a ton of valid info that you would need in these links that will allow you to gain a basic understanding of whats required to use a milling machine or lathe


http://electron.mit.edu/~gsteele/mirrors/www.nmis.org/EducationTraining/machineshop/mill/intro.html

http://www.eng.mu.edu/~dlc/machineshop/mill/intro.html

http://techtv.mit.edu/genres/24-how-to/videos/127-machine-shop-4

http://techtv.mit.edu/genres/24-how-to/videos/183-machine-shop-5

http://techtv.mit.edu/genres/24-how-to/videos/183-machine-shop-6

http://techtv.mit.edu/genres/24-how-to/videos/183-machine-shop-7

http://its.fvtc.edu/MachShop1/coolant/cutfluids.htm

yes I know this stuff is only of interest if you actually want to know how things get machined or if you own a milling machine, but it never hurts a darn thing to have the basic concepts down when some machine shop starts to B.S. you about the difficulty of doing some things, if you've got a good grasp on what you want done and how its accomplished you'll make smarted decisions.
the milling machine and the LATHE are the two real basic powered machine tools that allow most machine work to get done, add a decent welder and you can do a great deal of the work on your car or fabricate many custom parts



LATHE RELATED

http://techtv.mit.edu/genres/24-how-to/videos/144-machine-shop-8

http://techtv.mit.edu/genres/24-how-to/videos/144-machine-shop-9

http://techtv.mit.edu/genres/24-how-to/videos/144-machine-shop-10
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Re: mill and lathe info you might need

Postby bobinda808 » June 2nd, 2010, 8:14 pm

some good info there.
bobinda808

 
Posts: 8
Joined: March 21st, 2009, 12:54 pm

Re: mill and lathe info you might need

Postby grumpyvette » June 5th, 2010, 9:21 am

IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida


Return to Shop Plans, and some larger shop tool related info

Who is online

Users browsing this forum: No registered users and 1 guest

cron