Page 1 of 1

motor mounts , adapters,brackets sources

PostPosted: October 14th, 2008, 10:40 am
by mike
IF your having trouble getting motor mounts to line up correctly ,you do realize that chevy motor mounts come in several styles and heights
1- 11/16"
1- 3/4"
2 -1/8"
2- 3/8"
2 -9/32"

theres far more than just these designs
Image
Image
Image
Image
Image
Image
Image
Image


below youll find a list of suppliers for custom mounts, brackets and accessories, adapters, etc.
http://www.speedwaymotors.com/m/405_Eng ... -Kits.html

http://www.racecarparts.com/Big_Block_Chevy.html

http://www.eficonnection.com/eficonnection/58x.aspx

http://www.alangrovecomponents.com/Catalog.htm

http://www.kwikperf.com/lsx_alt_ps.html

viewtopic.php?f=71&t=545&p=684&hilit=motor+mounts#p684

http://billshotrodcompany.com/673/715.html

http://www.alangrovecomponents.com/Smal ... t_Pump.htm

http://www.tperformance.com/street_rod_ ... or_mounts/

http://www.brokenkitty.com/xj/xjv8.htm

http://www.ss396.com/chevelle/AMC-10SB.html

http://www.highangledriveline.com/unlti ... system.htm

http://www.highangledriveline.com/toy_flange.html

http://www.mrdriveshaft.com/U-Joint%20P ... 20U-Joints

http://www.pirate4x4.com/tech/billavist ... ndex4.html

https://sdp-si.com/eStore/Direct.asp?GroupID=574

http://www.billshotrodcompany.com/673/5301.html

http://www.speedhound.com/lsxswap.html

http://www.billetspecialties.com/assets/pdf/747.pdf

http://www.jagsthatrun.com/Pages/Jaguar_V-8.html

http://kwikperf.com/

http://americanpowertrain.com/c-313781- ... mbers.html

http://www.blackmountainprecision.com/

http://www.progressiveautomotive.com/motor.htm

http://chucker54.stores.yahoo.net/enginemounts.html

viewtopic.php?f=87&t=3060&p=8085#p8085

http://www.sachserodshop.com/pdf/5.pdf

http://www.tdperformance.com/categories/?id=3102

http://www.kwikperf.com/bbc_serp_kit.html

http://www.hotrodsusa.com/store/bills.html

http://www.campbellenterprises.com/motorplates.htm

http://www.alangrovecomponents.com/

http://chucker54.stores.yahoo.net/enginemounts.html

http://www.trzmotorsports.com/raceparts.html#rear

Image

Re: motor mounts , adapters,brackets sources

PostPosted: August 25th, 2010, 3:18 pm
by grumpyvette

Re: motor mounts , adapters,brackets sources

PostPosted: January 6th, 2012, 3:19 pm
by grumpyvette
heres a few of the newer hollley LS engine mount adapters

Image
Image
Image
Image
Image


BTW
if your doing a SBC to BBC engine swap, you might need this bit of info on frame mounts
Image
Image
Image
http://www.ss396.com/chevelle/AMC-10SB.html
http://www.gmpartsdirect.com/restoratio ... tegory.cfm
https://www.opgi.com/searchpart.asp?lev ... ame+mounts

raycow wrote:The stock SB frame bracket nos. are 3840755 LH and 3840756 RH. I don't know if they are reproed, because a lot of SB cars were built and the brackets are (were?) fairly easy to find in salvage yards.

If you want new brackets, or can't find used ones, you can use the 396 brackets, 3872815 LH and 3872816 RH. They will raise the engine slightly higher than the stock brackets, but are otherwise interchangeable. These brackets are reproed and available from the specialty parts vendors because a lot of people want to swap BB engines into these cars.

Ray

Re: motor mounts , adapters,brackets sources

PostPosted: December 27th, 2013, 11:33 am
by grumpyvette