by grumpyvette » June 19th, 2014, 6:39 pm
In my experience ,it won,t go "bad" in any reasonable time frame (like under 3-4 years)
but it can partially separate into both grease and a surface oil if left sitting for several years,but if it does that you can simply mix back together, It never gets a chance to degrade, in my shop, I use it too often and need to replace it frequently, but I have seen it separate when friends had some sitting on a shelf in a hot shop,for 5-6 years, we simply stirred it back, together,before smearing it over lifters and cam lobes and used it and it worked fineBTW THIS STUFF FROM HF
http://www.harborfreight.com/sta-lube-m ... 40712.htmldoesn,t work nearly as well as
viewtopic.php?f=71&t=3150&p=30205&hilit=moly+grease#p30205and neither of those products above is a direct substitute for assembly lube or moly cam/lifter assembly grease

and before some one askes , yes Ive seen lots of guys just use this grease smeared on cams and bearings as assembly lube, sometimes right out of the can, sometimes mixed with MMO and yeah it worked, but your safer using the product designed for the job rather than just mixing your own concoction, but like i said it worked when we used it years ago.

IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!