ballancing the assembly



ballancing the assembly

Postby grumpyvette » September 25th, 2008, 7:14 pm

Grumpyvette: Do you have any articles on balancing V8 engines when all component weights are known and crank maximum bobweight is also known? Please advise. Thanks

will this help?

http://victorylibrary.com/mopar/crank-bal-c.htm

http://www.centuryperformance.com/engine-balancing-for-life-power-amp-efficiency-spg-145.html

http://www.torquecars.com/tuning/engine-balancing.php

http://www.eddiesvalvegrinding.com/balancing.htm

http://www.circletrack.com/tipstricks/4 ... index.html

http://www.circletrack.com/techarticles ... index.html

http://www.circletrack.com/techarticles ... index.html

http://www.completeautorepair.net/engine_balancing.htm

http://www.circletrack.com/enginetech/c ... index.html

http://www.babcox.com/editorial/ar/eb10330.htm

http://www.carcraft.com/howto/ccrp_0803_engine_balancing/index.html

Image

If your assembling a EXTERNALLY BALANCED 383 or 400 based engine,you'll need externally balanced flex-plate and damper components, obviously its best to have all components used balanced as a unit if possible

http://www.summitracing.com/parts/TFS-19001/

damper
http://static.summitracing.com/global/i ... ctions.pdf
damper install instructions

there are 153 and 168 tooth flex plates (12.8" and 14.1")and flywheels
youll need to get one that matches and is also externally balanced
if your using an INTERNALLY BALANCED crank and rotating assembly the damper and flywheel or flex-plate are at least in theory neutrally balanced and will have minimal effect on the total assembly, BUT if your crank and rods etc. are EXTERNALLY balanced I can,t see how the assembly CAN BE balanced without those components

related info

viewtopic.php?f=38&t=3900&p=13058&hilit=internally+externally#p13058

viewtopic.php?f=53&t=141&p=5391&hilit=internally+externally#p5391

viewtopic.php?f=53&t=259

viewtopic.php?f=53&t=89

viewtopic.php?f=53&t=204

viewtopic.php?f=53&t=6026
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Return to Rotating Assemblies

Who is online

Users browsing this forum: No registered users and 5 guests

cron