help me out guys, I misplaced some info



help me out guys, I misplaced some info

Postby grumpyvette » February 11th, 2011, 7:00 am

help me out guys, I misplaced some info
I used to have 99% of everything memorized and the part numbers memorized or written down for easy access, but Ive mis-placed some info
I used to have a list of the extra/extra long OIL FILTERS that fit the first gen sbc and bbc chevy v8 engines, most common oil filters you get in the auto parts store that the parts books suggest are about 3"-3.5" long theres a few that are listed as extra capacity that are about 4.25"-4.94" long but there ARE a few that have the correct diam. threads and sealing rings that were not specifically listed as chevy v8 oil filters that will work as direct replacements that are 5"-6" long,IF I remember correctly the thread is 13/16-16 in. thread ID, 3.78 in. OD, and its that list of alternative oil filters that hang down almost to the length the oil pan extends below the engine Ive misplaced.
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Re: help me out guys, I misplaced some info

Postby Indycars » February 11th, 2011, 9:38 am

These might be the AC and NAPA filters you are referring to.

AC PF932
http://www.summitracing.com/parts/ACF-PF932/

NAPA FIL 1794
http://www.napaonline.com/Search/Result ... &Nty=1&N=0

Oil Filter Height (Inches) : 7.822"
Oil Filter O.D. (Inches) : 3.674"
Oil Filter Style : Spin-On Lube Filter
Flow Rate : 9 - 11 gpm
Gasket I.D. (Inches) : 3.1"
Gasket I.D. (mm) : 78.74 mm
Media Type : Cellulose
Oil Filter Gasket O.D. (Inches) : 3.444"
Oil Filter Gasket O.D. (mm) : 87.48 mm
Oil Filter Gasket Thickness (Inches) : .26"
Oil Filter Gasket Thickness (mm) : 6.6 mm
Oil Filter Height (mm) : 198.68 mm
Oil Filter O.D. (mm) : 93.32 mm
Oil Filter Thread Size (inches) : 13/16-16
Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: help me out guys, I misplaced some info

Postby grumpyvette » February 11th, 2011, 11:43 am

THANKS THAT HELPS!
HERES SOME ADDITIONAL INFO IVE FOUND



http://www.framcatalog.com/PartDetail.aspx?b=F&pn=PH373

http://www.wixfilters.com/filterlookup/ ... Part=51061

http://www.baldwinfiltersrus.com/baldwi ... er-Lookup/ B6

http://www.guarding-our-earth.com/deale ... ence.shtml

AC Delco # PF 932
Wix # 51794
Fram # HPH6349AFP






http://www.woodys-auto-supply.com/searc ... eyword=wix

http://www.aloha34.com/information/oilfiltertable.pdf

found it,
http://www.wixfilters.com/filterlookup/ ... Part=51061

, thanks guys

Ive used these for years like popcorn at the movies when I build most Chevy v8 engines,and buy them by the case, but for some reason the mind hit a blank wall and I could not remember the number, and Id cleaned up and threw out the old boxes.
obviously if you've got header clearance issues you may need to use a smaller filter but if you've got the room a longer quality filter with its greater surface area has advantages
keep in mind oil filters are critical as they trap crud and metallic debris that can quickly destroy an engine if it circulates with the oil flow, the larger surface area, of the longer extended length filters,adds internal surface area,and reduces the flow restriction and tendency for any crud entering the filter to be allowed to bye-pass the filter, and selecting a decent quality filter and quality oil, helps maintain a engines moving parts.


viewtopic.php?f=54&t=117

viewtopic.php?f=54&t=2080

viewtopic.php?f=54&t=296&p=539&hilit=+filter+matters#p539

viewtopic.php?f=52&t=282&p=5227&hilit=tool+filter#p5227

viewtopic.php?f=54&t=120

viewtopic.php?f=54&t=3834
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida


Return to Oil and Lube Systems

Who is online

Users browsing this forum: No registered users and 4 guests

cron