Page 1 of 1

links for calculating THE CORRECT injector SIZE NEEDED

PostPosted: October 14th, 2008, 9:49 am
by mike
http://www.grapeaperacing.com/tech/fuelsystems.pdf

http://www.iroczone.com/calcs/injectorsize.htm

http://kgparts.com/index.php?page=fuel-calc

http://www.injector.com/injectorselection.php

http://www.rceng.com/technical.aspx

http://www.bgsoflex.com/pwcomp.html

http://www.csgnetwork.com/fiflowcalc.html

http://users.erols.com/srweiss/calcpchg.htm

http://golenengineservice.com/calc/calcpchg.htm


BTW To remove the connector from the injector, push carefully in the middle of the locking clip, with your thumb, This will make the sides, and tips move OUT WARD in their connector slots allowing the tips that hold the injector into the connector to slide out of the way from the injector body, and you can then pull the sides away. WATCH the locking clip - IT can and WILL come off and get lost, if your not careful



btw this might help some guys
http://www.thirdgen.org/injectorswap