aluminum repair without the TIG welder



aluminum repair without the TIG welder

Postby grumpyvette » October 6th, 2008, 2:15 pm

http://www.aluminumrepair.com/faqs.asp

http://www.aluminumrepair.com/technical.asp
Image

Image
http://durafix.com/demo/256.html
http://www.youtube.com/watch?v=fWxYK3VF ... re=related

http://www.youtube.com/watch?v=QBkF_3Uz ... re=related

http://www.youtube.com/watch?v=Aad8IrXn ... re=related

http://www.harborfreight.com/pack-of-8- ... 44810.html

you don,t ALWAYS need a tig welder to repair aluminum ,and many parts you may assume are aluminum are actually ZINC ALLOY CASTINGS
example,
if your t-stat /intake housing mounting, is corroded or youve got an aftermarket timing chain cover this aluma-weld can be use to repair it in most cases even if its a zinc casting or an aluminum cast part

http://www.harborfreight.com/pack-of-8- ... 44810.html

http://www.alumiweld.com/h2uaw.html

Description of Harbor Freight 44810

Now you can weld aluminum with any low temperature torch--even a propane torch! Amazing technology makes a stronger weld than the parent material without flux or other welding material. Alumiweld makes a stronger weld than the parent material.

Stronger than aluminum
Harder than mild steel
Non-toxic
Low working temperature (730° F)
No flux or fumes
Excellent corrosion resistance
Minimize parent material distortion during welding
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Return to Welding Tips and Welders

Who is online

Users browsing this forum: No registered users and 1 guest

cron