floor pan replacement

[grumpyvette]

Is it possible to change out a full floor pan on a 67 camaro without a rotissierie

most shops don,t have a rotisserie,
you can do the job with a MIG OR TIG welder, a plazma cutter or air cut off tool and clecos or 1/8" drill and 1/8" pop rivets
read links

viewtopic.php?f=61&t=9263&p=33405&hilit=clecos#p33405

viewtopic.php?f=60&t=10601


viewtopic.php?f=60&t=10735&p=46871&hilit=clecos#p46871

viewtopic.php?f=61&t=8457&p=29663#p29663

http://www.harborfreight.com/12-ton-jac ... 34924.html

These super heavy duty jack stands will hold most cars and trucks safely at near 2 feet off the ground. Perfect for repair work or storage.
having 6 jack stands so you can place one at all four corners and two mid frame to prevent the cars frame from flexing during repair work helps

[NOT A TA]

Full pan should NOT be replaced while on rotisserie because the unibody will twist & flex. Best to have the subframe removed and the body on solid level supports.

[Strictly Attitude]

also best to weld in supports thats allot of metal and support to remove and replace.

[Thomasot]

печи для бани производители
печи банные
печи банные
печи для бани
печи для бани оптом
печи для бани
печи для бани производители
печи для бани оптом
печи для бани оптом