Page 1 of 1

floor pan replacement

PostPosted: December 31st, 2014, 10:09 am
by grumpyvette
Greginnc2014 wrote:Is it possible to change out a full floor pan on a 67 camaro without a rotissierie

most shops don,t have a rotisserie,
you can do the job with a MIG OR TIG welder, a plazma cutter or air cut off tool and clecos or 1/8" drill and 1/8" pop rivets
read links




viewtopic.php?f=61&t=8457&p=29663#p29663 ... 34924.html
These super heavy duty jack stands will hold most cars and trucks safely at near 2 feet off the ground. Perfect for repair work or storage.
having 6 jack stands so you can place one at all four corners and two mid frame to prevent the cars frame from flexing during repair work helps

Re: floor pan replacement

PostPosted: December 31st, 2014, 11:00 am
Full pan should NOT be replaced while on rotisserie because the unibody will twist & flex. Best to have the subframe removed and the body on solid level supports.

Re: floor pan replacement

PostPosted: January 2nd, 2015, 1:08 pm
by Strictly Attitude
also best to weld in supports thats allot of metal and support to remove and replace.

печи для бани оптом

PostPosted: February 21st, 2016, 6:09 am
by Thomasot