New GMPP Fast Burn Heads and Edelbrock Performer RPM intake



New GMPP Fast Burn Heads and Edelbrock Performer RPM intake

Postby enigma57 » January 23rd, 2015, 4:12 am

$1,350 - New GMPP Fast Burn aluminum heads, 210cc intake ports, 62cc chambers, lightweight 2.0" / 1.55" LT4 valves. These heads are drilled for both Vortec 8-bolt intakes and earlier style 12-bolt intakes. Will accept either newer center bolt valve covers or earlier style valve covers having 1960 and later 4-bolt mounting. Never bolted on an engine.

Description......

http://www.gmpartsdirect.com/results.cf ... r=12464298

Image

Image

Image


$180 - New Edelbrock Performer RPM Vortec intake for Fast Burn or Vortec heads (removed from new GMPP crate engine that was never started)

Image


If interested, please send PM. I am located NW of Houston, Texas.

Will ship parts and split shipping cost within lower 48 states...... Payment by US Postal Money Order accepted.

If picking up parts locally, cash on receipt...... No checks, MOs nor credit cards if picking up locally.

All sales are final......


Best regards and thanks for your interest,

Harry
enigma57

User avatar
 
Posts: 647
Joined: November 26th, 2008, 10:49 pm
Location: Galt's Gulch

Re: New GMPP Fast Burn Heads and Edelbrock Performer RPM int

Postby philly » January 24th, 2015, 11:53 pm

them some good prices i wish i had something to throw those on! good luck with the sale!
-phil

There's never enough money to build it right, but there's always enough to build it twice!
philly

User avatar
 
Posts: 1364
Joined: December 12th, 2013, 4:08 pm
Location: Miami FL

Re: New GMPP Fast Burn Heads and Edelbrock Performer RPM int

Postby enigma57 » January 25th, 2015, 6:30 pm

;) I've got a new 350 Chevy engine (still strapped to the shipping pallet) here that I removed a set of l31 iron heads from, Phil. Its listed in the older ad if you'd like the specs. These heads would be just the thing for that engine. Hint...... Hint......

Best regards,

Harry
enigma57

User avatar
 
Posts: 647
Joined: November 26th, 2008, 10:49 pm
Location: Galt's Gulch

Postby enigma57 » July 12th, 2015, 8:05 am

* Bump *
Last edited by enigma57 on October 6th, 2015, 1:20 am, edited 1 time in total.
enigma57

User avatar
 
Posts: 647
Joined: November 26th, 2008, 10:49 pm
Location: Galt's Gulch

Re: New GMPP Fast Burn Heads and Edelbrock Performer RPM int

Postby grumpyvette » August 8th, 2015, 1:04 pm

Image

please REGISTER AND post on new site
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Re: New GMPP Fast Burn Heads and Edelbrock Performer RPM int

Postby enigma57 » October 6th, 2015, 1:21 am

* Bump *
enigma57

User avatar
 
Posts: 647
Joined: November 26th, 2008, 10:49 pm
Location: Galt's Gulch


Return to The Swap Shop

Who is online

Users browsing this forum: No registered users and 2 guests

cron