reasonable price for assembly??



reasonable price for assembly??

Postby grumpyvette » December 8th, 2014, 6:50 pm

Maiettar wrote:Found these parts on usaperform.com I talked with someone for the company and got quoted about $2600.00 and these were the parts. do these prices sound right to you guys?
4.125 x 4.000 bore & stroke
427 cid
Manley LS7 4.000 stroke 4340 forged crankshafts
Manley 4340 forged H-beam rods, 6.125 length
750 HP with ARP8740 bolts, 1000 HP with ARP2000 rod bolts
ARP2000 bolt upgrade includes Clevite H-series main bearings
Precision Balanced
-5cc flat top piston = 12.0-1 w/66cc chambers
-11cc dish = 11.3-1
-18cc dish = 10.4-1
-29cc dish = 9.4-1
1.5mmx1.5mmx3mm Total Seal ductile moly rings
Clevite rod & main bearings
58 tooth reluctor installed



It pays to ask questions and have your machine shop test your block for bore wall thickness before its bored, youll need too keep in mind the max reasonable bore size on the block youll use

http://www.schwankeshortblocks.com/shopping/cart.aspx

http://www.corvetteforum.com/forums/c5- ... amond.html

http://www.jegs.com/p/Eagle/Eagle-Chevy ... 3/10002/-1


http://www.ohiocrank.com/chevls_rotate.html

https://www.texas-speed.com/p-1019-tsp- ... embly.aspx

http://scatcrankshafts.com/
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Return to corvette related misc.

Who is online

Users browsing this forum: No registered users and 1 guest

cron