Live 48 HOUR CORVETTE BUILD 10th-11th 12th



Live 48 HOUR CORVETTE BUILD 10th-11th 12th

Postby NOT A TA » March 11th, 2015, 10:54 am

Already in progress and streaming live 8 AM through midnight https://www.youtube.com/watch?v=TtJGOabDAKM
NOT A TA

 
Posts: 311
Joined: May 7th, 2014, 8:50 am
Location: Delray Beach FL

Re: Live 48 HOUR CORVETTE BUILD 10th-11th 12th

Postby Indycars » March 11th, 2015, 1:00 pm


Cool, they are putting the engine in right now!
Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: Live 48 HOUR CORVETTE BUILD 10th-11th 12th

Postby grumpyvette » March 11th, 2015, 1:25 pm

its rather refreshing, and a bit reassuring, to see the guys doing that engine install, run into the same deals most of us deal with,
in that bolt holes that are in theory pre-alighned don,t, line up correctly and parts that are designed to bolt together from different manufacturers SELDOM BOLT TOGETHER WITH OUT SOME CUSTOM FITTING, its RARE to get involved with any serious engine or drive train mods without needing to check and custom fit at least some components
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Re: Live 48 HOUR CORVETTE BUILD 10th-11th 12th

Postby Strictly Attitude » March 12th, 2015, 7:31 am

Just watched a little nothing too exciting just hidden hands doing work. That is the problem with this format not allot of what is going on can be seen.
"IF YOU CAN SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR SUSPENSION NEEDS MORE WORK!!"

John J. Coffey
Strictly Attitude Custom Graphics
Strictly Attitude

User avatar
 
Posts: 456
Joined: February 28th, 2014, 9:11 am
Location: West Sand Lake, NY

Re: Live 48 HOUR CORVETTE BUILD 10th-11th 12th

Postby bytor » March 13th, 2015, 5:41 am

Extended, starting at 10am EST today..
My 383 build photos
bytor

User avatar
 
Posts: 379
Joined: March 30th, 2010, 9:13 am
Location: Simpsonville, SC

Re: Live 48 HOUR CORVETTE BUILD 10th-11th 12th

Postby bytor » March 13th, 2015, 10:07 am

Dealing with EFI idle issues/setup now. Good to see the experts have challenges too..
My 383 build photos
bytor

User avatar
 
Posts: 379
Joined: March 30th, 2010, 9:13 am
Location: Simpsonville, SC


Return to corvette related misc.

Who is online

Users browsing this forum: No registered users and 2 guests

cron