hey rick, got an idea for the t-bucket



hey rick, got an idea for the t-bucket

Postby grumpyvette » March 14th, 2015, 10:35 am

youll most likely need to swap in a front axle and dual wheel rear differential from an 18 wheeler


Image




but I bet we can get a significant boost from this supercharger???
Image
IF YOU CAN,T SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR ENGINE NEEDS MORE WORK!!"!
IF YOU CAN , YOU NEED BETTER TIRES AND YOUR SUSPENSION NEEDS MORE WORK!!
grumpyvette

User avatar
Site Admin
Site Admin
 
Posts: 14105
Joined: September 14th, 2008, 1:40 pm
Location: florida

Re: hey rick, got an idea for the t-bucket

Postby 87vette81big » March 14th, 2015, 11:51 am

Never seen a Supercharger that big Grumpy.
Must be for a Moster Diesel engine in a Oil Tanker Barge or Cruise ship.
That's a Baby Truck Differential.
The strongest I know of is the Mack RB Bulldog Semi truck differentials used in Mack 6x6 off road cement trucks 1960's-1970's era.
Also used in US Army transport vehicles.
Have to weigh at least 2,000 lbs each.
You can actually burn off the tires dumping the clutch and standing on the gas pedal in 1st 2nd & 3rd.
I was a Mack Truck diesel mechanic at 28-29-30.
Overhauled all. Engines, trans, & the Bulldog diffs.
87vette81big

User avatar
 
Posts: 3278
Joined: February 28th, 2012, 12:34 am
Location: Central Illinois

Re: hey rick, got an idea for the t-bucket

Postby 87vette81big » March 14th, 2015, 11:53 am

Old Macks have Super Torque.
Bullet proof bottom ends.
87vette81big

User avatar
 
Posts: 3278
Joined: February 28th, 2012, 12:34 am
Location: Central Illinois

Re: hey rick, got an idea for the t-bucket

Postby Indycars » March 14th, 2015, 2:06 pm


Grumpy ...... if you buy it, I will mount it and take us both for a ride to heaven. :D :P

Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: hey rick, got an idea for the t-bucket

Postby philly » March 14th, 2015, 11:17 pm

Indycars wrote:
Grumpy ...... if you buy it, I will mount it and take us both for a ride to heaven. :D :P




ill donate 5 bucks to that
-phil

There's never enough money to build it right, but there's always enough to build it twice!
philly

User avatar
 
Posts: 1364
Joined: December 12th, 2013, 4:08 pm
Location: Miami FL

Re: hey rick, got an idea for the t-bucket

Postby Strictly Attitude » March 15th, 2015, 12:35 am

Hellcat killer if you get it I volunteer to paint that on the t bucket
"IF YOU CAN SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR SUSPENSION NEEDS MORE WORK!!"

John J. Coffey
Strictly Attitude Custom Graphics
Strictly Attitude

User avatar
 
Posts: 456
Joined: February 28th, 2014, 9:11 am
Location: West Sand Lake, NY

Re: hey rick, got an idea for the t-bucket

Postby Indycars » March 15th, 2015, 12:00 pm

Phiillyyy wrote:ill donate 5 bucks to that



I'm going to need more than 5 bucks for this project, more like your next 3 years
of salary. Is it a deal, let me know when you have it scraped together!!! :P

Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: hey rick, got an idea for the t-bucket

Postby Indycars » March 15th, 2015, 12:32 pm

Strictly Attitude wrote:Hellcat killer if you get it I volunteer to paint that on the t bucket

It will have to be free if I spend $500,000 on this project! :P
Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: hey rick, got an idea for the t-bucket

Postby philly » March 15th, 2015, 3:53 pm

Indycars wrote:
Phiillyyy wrote:ill donate 5 bucks to that



I'm going to need more than 5 bucks for this project, more like your next 3 years
of salary. Is it a deal, let me know when you have it scraped together!!! :P




dont hold your breath
-phil

There's never enough money to build it right, but there's always enough to build it twice!
philly

User avatar
 
Posts: 1364
Joined: December 12th, 2013, 4:08 pm
Location: Miami FL

Re: hey rick, got an idea for the t-bucket

Postby Strictly Attitude » March 15th, 2015, 5:22 pm

Indycars wrote:
Strictly Attitude wrote:Hellcat killer if you get it I volunteer to paint that on the t bucket

It will have to be free if I spend $500,000 on this project! :P

It would cost you a ride around the block so about the cost of 50 gallons of fuel
"IF YOU CAN SMOKE THE TIRES AT WILL,FROM A 60 MPH ROLLING START YOUR SUSPENSION NEEDS MORE WORK!!"

John J. Coffey
Strictly Attitude Custom Graphics
Strictly Attitude

User avatar
 
Posts: 456
Joined: February 28th, 2014, 9:11 am
Location: West Sand Lake, NY

Re: hey rick, got an idea for the t-bucket

Postby Indycars » March 15th, 2015, 6:00 pm


Guess I will have to come back from Heaven to give you a ride then. Not a problem
for me, but not sure what the rules are surrounding such activities. :D :lol: :P

Grumpy probably has an inside line to the answer I suspect with his connections, but
he might have to invoke his wife's connections to pull this one off. :P

Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK

Re: hey rick, got an idea for the t-bucket

Postby Indycars » March 15th, 2015, 6:02 pm

philly wrote:dont hold your breath


hehehehehe !!!!
Rick
Too much is just enough!!!

- Check Out My Dart SHP Engine Project: viewtopic.php?f=69&t=3814
- Need a Dynamic Compression Ratio Calculator: viewtopic.php?f=99&t=4458
Indycars

User avatar
Forum Admin
Forum Admin
 
Posts: 4424
Joined: May 25th, 2010, 8:58 am
Location: Yukon, OK


Return to Superchargers, Turbos, Nitrous

Who is online

Users browsing this forum: No registered users and 4 guests

cron